• Swimming Pool Filter Pump 2.5HP
  • Swimming Pool Filter Pump 2.5HP
  • Swimming Pool Filter Pump 2.5HP
  • Swimming Pool Filter Pump 2.5HP
  • Swimming Pool Filter Pump 2.5HP
  • Swimming Pool Filter Pump 2.5HP
  • Swimming Pool Filter Pump 2.5HP
  • Swimming Pool Filter Pump 2.5HP
  • Swimming Pool Filter Pump 2.5HP
  • Swimming Pool Filter Pump 2.5HP
  • Swimming Pool Filter Pump 2.5HP
  • Swimming Pool Filter Pump 2.5HP

Swimming Pool Filter Pump 2.5HP

$294.95 $389.96 SAVE 24%


Order And Get 24% Off Today! Limited Time Offer!

Delivered In 10-15 Days! 


  • The 2.5 HP Pool Pump is designed specifically for the rigors of above-ground and on-ground pools
  • Heavy-duty motor offers dependable performance, energy efficiency and quiet operation
  • Durable, corrosion-proof housing for all-weather performance and quiet operation
  • Extra-large debris basket with clear cover keeps pool maintenance to a minimum
  • Drain plug provides easy maintenance of pump

Advanced Features

This is a high performance pump, featuring a heavy-duty motor, which provides dependable performance and quiet operation. An extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. The 100% drip proof, heat-resistant, double-sized seal offers a long motor life, so you don’t have to worry about needing a replacement anytime soon. Dependable, quiet and energy efficient.

Maintain a crystal clear and sparkling pool or spa that everybody loves with the new SPPE series self-priming 1850W electric swimming pool pump. Thanks to its super-efficient IP55 1850W 2.5HP electric motor, you can save significant time and money- truly the industry's most energy-efficient filtration pump.

How to use

1.Locate the pump as close as possible to the pool.

2.The pump suction line should not be smaller than the pressure line. All piping must be airtight

3.The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on.

4.The weight of the piping should be supported independently and not carried by the pump.

5.Fill the pump tank with water before starting.

6.High suction lifts, or long suction lines, require additional time and reduce the performance of the pump.

7.The water being pumped cools and lubricates the seal.

8.After the pump tank has been filled with water, and the motor started, allow a few moments for the pump to start delivering water.


The installation must be according to the normal power indicated on the label.
The amperage must not at any time exceed the value indicated on the label
It is recommended that you consult a state-registered electrician.
Place the pump in a dry area with good ventilation.

The ambient temperature must not exceed 40℃
The pumps are only suitable for counter-clockwise rotation when viewing from the pump end.Three phase motors can rotate in either direction.Interchanging any of the cables on a three-phase motor will reverse the rotation.Momentarily start,or bump the motor without water in the tank,to check the rotation of the pump shaft.
Before disconnecting electrical connections,shut off electricity at its source.

This appliance is not intended for use by persons,including children with reduced physical,sensory or mental capabilities or lack of experience and knowledge,unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.


  • Model : SPPE 250
  • Power : 1850W/2.5HP
  • Voltage : 110V / 60Hz
  • Max. Flow : 560 L/m
  • IP55 INS CL.F : Max. 50 C
  • Amps : 16A
  • Head : Max 19m / 62.34ft
  • Thread diameter : G2.25"
  • Capacitor : 25 F
  • Inlet : 1.5" Internal
  • Outlet : 1.5" Internal
  • Diameter of white connector : 48.5mm/54.5mm
  • Pipe Compatibility : Fit 1.5 inch plumbing internally
  • Noise Level : <65dB
  • Weight : 10.2 kg / 22.5 lbs
  • Powerful Self-Priming IP55 2.5HP Electric Motor, low noise with quiet operation and no leak.
  • Suitable for pools up to 100,000 litres.
  • Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min.
  • Full Size Removable Strainer Basket.
  • 100% Salt and Chlorine compatible.
  • Full Commercial Duty - Designed to run 24/7.
  • Works with In ground and Above Ground.
  • Built-In Thermal Overload Protection.
  • Ideal for Residential/Commercial Swimming Pools & Spa's.
  • CE Certification.
Package Includes 
  • SPPE250 Swimming Pool Pump X1
  • White ConnectorX2
  • User's ManualX1
Our Guarantee

When you shop with us, you can trust that you’re spending your money wisely, on products that will make a different in your life and business. We work to offer an Iron-Clad 100% Customer Satisfaction Guarantee. You don’t love it, we’ll go above and beyond to make sure you’re happy with the experience.

We offer 24/7/365 ticket and email support. Get in touch with us if you have any questions, concerns, comments, or just want to say “hello.” We’re happy you chose to shop with us.

Shoot Galleries 5-Point Happiness Checklist

100% Free Shipping. No Surprises or hidden fees ever.
Safe payments via Credit/Debit card or PayPal®.
30-Day Money-Back Guarantee
Friendly support staff.
Tracking number with every order.


We use encrypted SSL certificates for 100% security.

Click the 'Add To Cart' Button Above To Order Now!
Limited Quantity Available - Will Sell Out Fast! 

Product added to your Cart

By using this site, you agree to the use of cookies that we use to provide an optimized shopping experience. Learn more

Got It